Installation of water For floor heating installation floor heating system of water you ponadobitsyTruba tap – which has very good flexibility, such as metal pipes, as well as the pipe must withstand temperatures 95 or coolant reservoir vyshe.Raspredelitelny (comb) – depending on the number of rooms or the floor heating loops should contain a definition of the number of outlets. The same distribution collector can be fitted simply adjusting stop valves or flow meters have to automatically adjust or disable a particular branch of the warm pola.Uplotnitel – commonly used solid foam to protect the pipe from damage to the concrete osnovaniem.Otrazhatel – designed to prevent loss tepla.Dempfernaya tape – as a warm floor is subject to thermal expansion the main floor covering, such as floor tiles, it is necessary to protect it from damage. For the installation of underfloor heating water only one or two people with the necessary skills. Once you have decided on the number of circuits heating floor heating and a place to install the distribution manifold, you are ready for installation of floor heating. Having laid damping tape on the perimeter of the room, laid with sealant, and on top of a reflector, a place nahlestav reflector, held together with tape. If you would like to know more then you should visit Peter Asaro .
And since the base for rolling the pipe we have done. The next step should be reeling out and laying pipe. Pipe can be rolled in two versions – a snake or spiral. Important to remember that delivery pipe should alternate with the outlet pipe, thus you are assured an even temperature throughout the floor. If there was reeling out the pipe without rotation, is facing the fact that one part of the floor located on the feed pipe will be warmer than the part of the floor under the outlet pipe. Another important fact is that the total pipe length of each circuit should not exceed 120m. Better room divided into several contours, rather than roll out a large length of pipe. After the installation of pipes, note that there are no creases on the pipes, as it will negatively affect the future, and whether fixed pipe across the floor area, or raising of the pipe will cause the filling to increase the thickness of the layer. Using materials reference is obligatory santehnik.okis.ru