Floor Renovations

He might be involved directly in the inlet to the floor or scattered on freshly applied layer. Remnants of sand are removed after the core layer is completely cured. Application of finishing layer Upon completion of this stage, begin to spray finish. This may be polymers used to create the basic layer, or varnish. To make the cover of attractive appearance, it can be sprinkled with colored inlay-chips. Splitting seams Liquid polymer floors virtually no shrinkage, and Still cutting sutures are needed. Applied to the base coating is experiencing all the linear strain faced concrete in service. Temperature-shrinkage joints are cut so that they were over the seams in the concrete base.

In the case where the base has an age of more than a year, self-leveling floor seams to be two times less than in the concrete. Slotted joints subjected to coating, and then filled sealing cord and suture sealant. Despite the fact that the surface is self-leveling floor ready for use within 1-2 days, the whole load can be carried out only after 5-10 days after cutting and filling the joints in the finish. The equipment for self-leveling floor when the device self-leveling floor requires special equipment: clean buckets of not less than 30 liters for mixing; drill with a mixer, the length of which shall be greater than the depth of the bucket, trowel to a uniform distribution of hard to reach places; squeegee with adjustable gap, needle roller to remove air bubbles, the soles on the spikes to move on freshly applied coating. Removal of the composition with instruments made by the solvent. The choice of materials for the preparation of the base and filling the floor to create high-quality coverage in a particular case requires its own set of works on the inlet floor.

Much depends on the future exploitation of sex, the requirements for coverage, floor area, type of foundation. The company offers a wide Remmers range of materials for the seams and cracks, priming of the base, as well as many types of polymer coatings and decorative posypok. Highly skilled experts will help select the appropriate materials will advice on their effective implementation, conduct training seminars with practical exercises on test sites. Competent approach to the device inlet floor and strict adherence to the technology of its placement guarantee long service life and its attractive appearance.