In the final After all, cable is designed and aimed at mass production, which in diameter is 2.6 mm. When we get the width of the wire of 1.1 mm, it becomes clear what should be a manufacturing tolerance. Insulation and the shell will be wall thickness from 0.35 to 0.4 mm. To ensure that mobility will be used by a special combination of lubricants between conductor and sheath. This is one example of developing a new cable design according to customer requirements. To the Director of TKDKabelGmbH.
TKD Kabel GmbH providing the highest quality manufactured products, carry out tests to verify the mechanical and electrical properties of cables. All companies are certified, ensuring the quality of the process. A list of tests that are conducted during product development is very large. The most basic for this product range is undoubtedly the test that reproduces mechanical stresses and ensures long life outdoors. For this testing is conducted, such as landing loads on multiple bending, drum samples, which stimulated a very high twisting or pulling the load during operation. In addition the products are tested for resistance to aging wires conditioned cabinets.
Bottom line: As far as cable requirements in the transport equipment multifaceted, so versatile test. At the present time in modern high-tech world in solving the problems of lifting, transportation and movement of goods can not do without drag chains. In stock cables for lifting and conveying systems there are cables that are directly targeted or may be used for this application.