Technical Committee Containers

Test 1-container is dropped vertically following one perpendicular to the surface coincident with its longitudinal axis shock and continuing impact on their basis. Essay 2.-container is dropped in a horizontal position, producing impact on one side of his body. The heights of trials 1 and 2 are determined according to the tested container volume: less than or equal to 1000 ml container: 1.5 metres. More than 1,000 ml container: 1 meter. 90 Per cent of containers to be tested must withstand the test carried out completely so that the result is satisfactory. Compressive strength containers for bleach are arranged within their respective packaging and it is subjected to a force applied on its upper surface, equivalent to the total mass of identical packages to two metres in height of stacked packaging of its same size and capacity. The test duration is at least 24 hours.

Packs are filled with their respective packaging and both they are closed and placed in the same way that if would be destined for the expedition. The application rule is the UNE EN ISO 2234: 2003 repealing the norm UNE 49.701 h9 indicated in the regulation. Tightness test reason for trial containers are placed in an inverted position, leaning against the closure for two hours, after which should not have occurred loss or spillage of liquid, repeating twice in each container, opening and returning to close the container every time. Dangerous goods of AIDIMA laboratory is accredited by ENAC (national accreditation entity) to perform this type of testing is official laboratory of the Ministry of industry, tourism and trade Dangerous goods of AIDIMA lab, has extensive experience of over 10 years in the conduct of the aptitude test for obtaining the approval of packagings intended for the carriage of dangerous goods and holds the coordination group’s work 4, containers and packagings for the transport of dangerous goods, of the Technical Committee of standardization 49 of AENOR.